GUTOR 0P6267 Circuit Board

Description

Product Introduction & Engineering Value

The GUTOR 0P6267 is more precisely identified than a generic GUTOR PCB: available listings associate it with the PCA ISODRIVER SDC-6P and reference FKM6108V1-2. That distinction matters when sourcing a replacement because GUTOR systems contain multiple control, interface, and power-related boards with similar physical characteristics.

For a replacement, match the complete identification rather than relying on 0P6267 alone. Check the SDC-6P designation, FKM reference, board revision, connectors, and host equipment configuration before installation.

Technical Specifications

• Manufacturer: GUTOR
• Part Number: 0P6267
• Board Type: PCA / printed circuit board assembly
• Functional Designation: ISODRIVER
• Associated Model: SDC-6P
• Reference Number: FKM6108V1-2
• Equipment Category: Industrial power electronics / UPS
• Primary Application: GUTOR SDC-6P equipment
• Installation: System-level PCB assembly
• Replacement Basis: Exact part-number and assembly-reference matching
• Condition Availability: Used and New listings are present in secondary markets
• Compatibility: Dependent on the specific GUTOR system configuration

A supplier listing also identifies WEF 344840940327200023 alongside the 0P6267 / FKM6108V1-2 identification. Treat that as an individual unit marking rather than a universal specification.

Field Application & the “Trench” Experience

A typical failure scenario is a GUTOR UPS showing abnormal operation while the larger power assembly remains intact. The maintenance team narrows the problem to an interface/driver board and finds that the required spare is no longer readily available through conventional distribution.

With the 0P6267, the technician should compare the failed board against the replacement at the identification level: 0P6267 → ISODRIVER → SDC-6P → FKM6108V1-2. That chain provides substantially better confidence than simply matching PCB dimensions.

Relevant applications include:

1. GUTOR SDC-6P UPS maintenance where an ISODRIVER board requires replacement.
2. Industrial control-power systems supporting automation and instrumentation loads.
3. Marine and offshore electrical systems, where GUTOR spare electronics are encountered in legacy vessel and offshore equipment. A current secondary-market listing specifically offers the 0P6267 as a GUTOR marine/industrial electronics spare.

0P6267

0P6267

Transparency SOP: QA & Testing

For New Surplus or Refurbished 0P6267 stock, use a component-specific inspection process:

1. Identification verification
Confirm 0P6267, ISODRIVER, , and FKM6108V1-2 where those markings are present.

2. PCB inspection
Check connectors, component bodies, solder joints, PCB traces, mounting points, and protective coatings.

3. Condition assessment
Look for corrosion, contamination, heat damage, repaired components, and evidence of previous installation.

4. Electrical checks
Perform appropriate continuity, isolation, and component-level checks according to the applicable test procedure.

5. System-level validation
Where the correct GUTOR test environment is available, verify the board under controlled operating conditions.

A marketplace listing currently describes a 0P6267 as a used PCB, while another listing describes a GUTOR 0P6267 as new. This reinforces the need to verify the actual condition of the specific unit being quoted, rather than relying on the part number.

The Veteran’s Tech Trap Guide

⚠️ Trap #1 — 0P6267 is not enough identification.
The ISODRIVER / / FKM6108V1-2 information is useful for confirming that you have the intended board. One supplier explicitly identifies all three.

⚠️ Trap #2 — Don’t confuse a PCB inspection with a functional test.
A clean board with intact components can still have failed semiconductor devices, isolation components, or driver circuitry.

⚠️ Trap #3 — Beware of uncontrolled bench power.
An ISODRIVER board may interface with power-electronics circuitry. Do not improvise a test voltage based solely on the board’s appearance. Use the appropriate GUTOR procedure and qualified personnel.

PRO TIP: When requesting this spare, specify “GUTOR 0P6267, PCA ISODRIVER, , ” and request photographs of the actual label and PCB. That sharply reduces the risk of receiving a generic board described only as “GUTOR 0P6267.”

Dynamic FAQ

What is GUTOR 0P6267?

GUTOR 0P6267 is identified in available equipment listings as a PCA ISODRIVER circuit board. Its associated reference is .

What does refer to?

is the model/designation associated with the ISODRIVER board in available listings. It should be used as part of the compatibility check when sourcing the replacement.

What is ?

is the reference associated with the GUTOR 0P6267 ISODRIVER board in current secondary-market documentation.

Is 0P6267 available as New Surplus?

Yes. Current secondary-market listings include a 0P6267 described as new, while other listings offer used units. Verify the physical condition and test status of the exact unit before purchase.

Can any GUTOR 0P6267 replace my existing board?

Not automatically. Match the 0P6267, ISODRIVER designation, association, reference, hardware revision, and host system before installation.

What warranty should I request?

For a critical UPS spare, request the warranty period in writing and clarify whether it covers functional failure after installation. Also ask whether the board was electrically tested or merely visually inspected.