Metso D200136L | 28 VDC Power Supply Module

Description

Core Product Summary (Brand / Model / Key Attributes)

The Metso ADC5483-D200136L (also identified as CPS D200136L) is an industrial power supply module designed for Metso control and automation systems. It converts 115/230 VAC input power into a regulated 28 VDC output at 9 A to supply control electronics and related loads.

The module accepts dual-range AC input (115 V or 230 V at 50/60 Hz) and is intended for permanent installation in industrial control cabinets. Approximate weight is 1.75 kg.

Key Technical Specifications

Detailed Product Overview

The Metso ADC5483-D200136L is a dedicated power supply module used within Metso industrial control systems. It accepts single-phase AC mains power in the 115 V or 230 V range at standard 50/60 Hz frequencies and produces a stable 28 VDC output rated at 9 A.

The dual-voltage input capability allows the same module to be used in installations designed for either nominal mains voltage without hardware modification. Input current draw is correspondingly lower at the higher voltage range (2.5 A at 230 V versus 4.5 A at 115 V).

The module is constructed for industrial cabinet mounting and is intended to provide continuous DC power to control electronics, I/O assemblies, or other system components that require a 28 VDC supply rail. Its relatively compact size and approximately 1.75 kg weight facilitate installation in standard control panels.

Because it is a power-conversion component, correct upstream protection, proper grounding, and adequate ventilation must be observed according to the host system documentation. The module itself contains no fieldbus or communication interfaces; its sole function is AC-to-DC power conversion.

D200136L

D200136L

System Compatibility & Integration Requirements

Dimensions, Mounting & Connection Notes

The module has an approximate weight of 1.75 kg. It is intended for fixed mounting inside an industrial control cabinet. Input and output connections follow the terminal arrangement defined for the ADC5483 series; refer to the host system documentation for wiring and torque requirements. Adequate clearance for ventilation must be maintained.

Engineering Selection Highlights

• Provides regulated 28 VDC at 9 A for Metso control-system loads.
• Dual-range AC input (115/230 V, 50/60 Hz) supports installations in different mains environments.
• Input current ratings of 4.5 A (115 V) and 2.5 A (230 V) allow correct upstream fuse or breaker sizing.
• Compact industrial form factor with approximate weight of 1.75 kg suitable for control-cabinet mounting.
• Direct replacement part identified by the full order code ADC5483-D200136L or CPS D200136L.

FAQ

What is the Metso ADC5483-?
It is an industrial power supply module that converts 115/230 VAC input into regulated 28 VDC output at 9 A for Metso control systems.

What is the output rating?
28 VDC at 9 A continuous.

What input voltages does it accept?
115 VAC or 230 VAC at 50/60 Hz.

What is the approximate weight?
1.75 kg.

Is the module intended for field mounting?
No. It is designed for installation inside a control cabinet.

What is the full order designation?
ADC5483- (also referenced as CPS ).

Verification & Troubleshooting Notes

• Verify the nameplate markings match ADC5483-D200136L or CPS D200136L before installation.
• Confirm the available mains voltage (115 V or 230 V) and select the corresponding input connection.
• Check upstream protection devices against the stated input current values (4.5 A at 115 V / 2.5 A at 230 V).
• After installation, measure the 28 VDC output under load to confirm correct operation.
• Ensure adequate ventilation around the module in accordance with the host system guidelines.