Description
Product Introduction
The AutomationX AXLINK100 (Part No. 892.202988) is a specialized network communication interface module designed for AutomationX distributed control architectures. Operating as a dedicated fieldbus bridge, this hardware layer handles deterministic data exchange between central industrial controllers and remote I/O islands across demanding plant-floor environments.
Built for heavy industrial process control, the AXLINK100 ensures low-latency packet delivery and robust protocol handling. Its compact DIN rail-mounted form factor integrates cleanly into existing control panel layouts, providing isolated bus connectivity that protects central processing units from electrical noise and transient ground spikes originating on long field runs.
Key Technical Specifications
| Parameter | Value |
| Product Line | AutomationX AxLink Communication Series |
| Device Type | Fieldbus Network Interface Module |
| Part Number | 892.202988 |
| Communication Protocol | AxLink Proprietary Industrial Bus |
| Mounting Type | DIN Rail Mountable |
| Diagnostic Indicators | Front-panel LED status lights for power, run, and bus error |
| Operating Temperature | 0 °C to 55 °C (32 °F to 131 °F) |
| Enclosure Type | Industrial modular plastic housing |
| Power Supply Requirements | Standard 24 VDC rack power bus |
Application Scenarios & The “Trench” Experience
Picture this: It is 2:00 AM during a heavy continuous batch run at an industrial production facility. Suddenly, a remote I/O cluster drops offline, throwing a bus communication fault across the AutomationX supervisory control system and halting material handling lines. Troubleshooting tracks the failure to a fried communication interface module on the DIN rail, likely cooked by an induced voltage transient from an adjacent heavy motor starter. Operations are dead in the water, and waiting weeks for factory-direct replacement parts will destroy production quotas. You pull a pre-tested AXLINK100 (892.202988) off your shelf, snap it onto the DIN rail, plug in the network connectors, and restore full deterministic bus communication before the morning shift arrives.
- Industrial Process Automation: Bridging distributed field I/O drops back to central AutomationX control nodes in heavy manufacturing.
- Energy & Power Distribution Skids: Managing real-time telemetry and control data exchange across high-EMI switchgear enclosures.
- Material Handling & Conveyor Systems: Maintaining deterministic communication across sprawling, multi-zone transport lines.
Transparency SOP: Quality Assurance & Testing
We don’t just ship boxes; we test them on actual AutomationX test benches. Every surplus AXLINK100 (892.202988) unit goes through a strict verification protocol before leaving our warehouse:
- Inbound Inspection: Physical check for housing integrity, connector pin alignment, and OEM label legibility.
- Live Rig Testing: Installed onto a dedicated AutomationX AxLink test rack to verify power-on self-tests, bus handshake stability, and error-free packet transmission.
- Thermal Stress Check: Running sustained communication traffic loops to confirm thermal stability under operating temperature loads.
- Firmware & Revision Logging: Verifying internal hardware revisions and logging serial numbers against QA records.
- Final QC & Anti-Static Packaging: Sealed in anti-static moisture barrier bags with high-density ESD protection.
AXLINK100 892.202988
AXLINK100 892.202988
The Veteran’s Tech Trap Guide (Crucial Value-Add)
- ⚠️ Turn Off Panel Power First: Never hot-swap the AXLINK100 while the DIN rail power bus is energized. Pulling communication cards live can cause bus lockups, corrupt active register tables, or damage sensitive transceiver chips.
- ❗ Verify Termination Resistors: Ensure that both ends of your AxLink bus topology are fitted with correct physical termination resistors. Missing or incorrect terminators will cause signal reflections, packet loss, and intermittent node dropouts.
- ⚠️ Shield Grounding Discipline: Always terminate your communication cable shields at a single designated panel grounding bar. Grounding shields at both ends creates ground loops that inject electrical noise straight into the data transceivers.
Frequently Asked Questions (FAQ for Conversion)
Q: Is the AXLINK100 (892.202988) hot-swappable?
A: No. Legacy and standard AxLink rail configurations do not support live insertion. Always kill power to the rack before servicing network modules.
Q: Are these units brand new or refurbished?
A: Our inventory consists primarily of New Surplus and Factory Sealed stock sourced from industrial plant liquidations and system upgrades. Every unit undergoes live test-bench verification prior to shipment.
Q: Why is your price lower than purchasing directly through OEM channels?
A: Factory channels often apply heavy lifecycle management premiums to legacy industrial automation hardware. We source certified surplus inventory directly, enabling us to deliver original parts immediately without forcing expensive system migrations.
Q: What warranty is included with purchase?
A: Every AXLINK100 (892.202988) ships with our comprehensive 12-month replacement warranty.
Start Chat
