Description
Key Technical Specifications
- Model Number: SAFT112POW
- Manufacturer: ABB
- Product Type: Industrial Power Supply Module / Power Supply Board
- Input Voltage: 100–240 V AC (reported specifications vary by source; verify OEM documentation before installation)
- Output Voltage: 24 V DC
- Rated Power: 112 W
- Output Current: Up to 4.67 A (verify exact revision before replacement)
- Efficiency: ≥92% (supplier-listed specification)
- Operating Temperature: −40 °C to +70 °C (supplier-listed specification)
- Mounting: Industrial panel/DIN rail style installation depending on system configuration
- Protection Features: Overload and short-circuit protection
- Weight: Approx. 0.3 kg (supplier-listed)
Product Introduction
ABB SAFT112POW is an industrial power supply module designed to provide regulated DC power for ABB automation and control applications. It is used as a replacement power component where stable DC supply is required for industrial electronic systems.
This module is selected for maintenance replacement projects where equipment downtime must be minimized. Before installation, verify the exact hardware revision, wiring layout, and electrical specifications against the original ABB documentation.
- SAFT112POW
- SAFT112POW
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| No power output after startup | Input AC supply missing | ✅ High | Measure AC input terminals with a calibrated multimeter | Confirm upstream breaker, fuse, and wiring before replacing module |
| DC output missing | Internal power module failure | ✅ High | Measure 24 V DC output at power terminals | Replace module if input is correct but output remains absent |
| Output voltage unstable | Overload or downstream short circuit | ✅ High | Disconnect load and check output recovery | Inspect connected devices before installing replacement |
| System resets randomly | Insufficient DC capacity | ⚠️ Medium | Measure voltage drop during equipment startup | Calculate total load current and keep power supply margin |
| Module overheats | Poor ventilation or excessive load | ⚠️ Medium | Check cabinet temperature and airflow | Correct cooling issues before replacement |
| LED/status indicator abnormal | Internal fault or wiring issue | ⚠️ Medium | Check indicator state and diagnostic notes | Record photos before removing the unit |
❗ Technical support note: If the failure source is unclear, provide photos of the installed module, wiring terminals, nameplate, and diagnostic measurements before replacement.
Frequently Asked Questions (FAQ)
Q: Is ABB SAFT112POW a new production module or an obsolete spare part?
A: Availability depends on supplier inventory. Many SAFT112POW units are sold as New Original, New Surplus, or refurbished industrial spares. Confirm condition before purchase.
Q: Can I replace my existing power module directly with ?
A: Only after checking voltage, current rating, connector layout, and system compatibility. Do not replace by model number alone if the original installation is part of a larger ABB control system.
Q: What should I check before installing a replacement ?
A: Record the original wiring, terminal assignments, jumper settings, and nameplate information. A photo before removal prevents many field mistakes.
A: A standalone power module normally does not require software configuration, but the connected ABB system may require power-cycle checks and verification after replacement.
A: Industrial spare parts often come from maintenance stock, project overages, or discontinued inventory. The key checks are traceability, testing records, and storage condition.
Q: Is this module hot-swappable?
A: Do not assume it is. Removing power modules under load can damage equipment or create unsafe conditions. Follow the original ABB installation procedure.
A: Request serial verification, visual inspection photos, output voltage testing, load testing records, and packaging details. A tested spare should include documented verification rather than only a cosmetic inspection.
Start Chat
