Alcatel-Lucent 8DG60739AA 112SA1L 100G A/D OT

Description

Product Introduction & Engineering Value

The Alcatel-Lucent 8DG60739AA is a 1830 PSS optical-transport card identified as 112SA1L, with a 100G coherent XL-band add/drop function. It belongs to the photonic transport side of the 1830 PSS architecture rather than being a conventional Ethernet switching interface.

For replacement work, the complete identification is important: 8DG60739AA / 112SA1L. Public listings also show multiple hardware revisions, including versions marked 02, 03, 04, and 05. Do not assume a revision change is insignificant; compare the failed card’s complete label and your network BOM before substitution.

Technical Specifications

A government procurement schedule independently identifies 8DG60739AA as “112SA1L 100G Coherent XL-band A/D OT,” providing stronger part-number evidence than relying only on secondary-market descriptions.

Field Application & the “Trench” Experience

Picture a long-running metro DWDM node where the optical plant itself is still serviceable, but one 100G add/drop card begins generating persistent optical alarms. The maintenance team does not need a platform redesign. They need the correct spare, installed during a controlled maintenance window.

The procurement trap appears immediately: the failed unit may be marked 8DG60739AA 03, while the available warehouse spare is marked 8DG60739AA 04. Before installing it, the engineer checks the approved BOM, card revision, shelf configuration, and network software compatibility. That five-minute verification is cheaper than discovering a hardware mismatch after the maintenance window has closed.

Specific application scenarios

• 100G metro DWDM add/drop node — local insertion or extraction of high-capacity optical traffic.
• XL-band photonic transport shelf — use within an existing 1830 PSS optical network requiring XL-band A/D capability.
• Carrier backbone regeneration site — replacement of a failed 100G optical card while retaining the installed 1830 PSS architecture.
• High-capacity interoffice transport — support for 100G wavelength services between optical network nodes.

The specific 112SA1L designation and 100G XL-band A/D description are corroborated by multiple equipment listings and a government schedule.

8DG60739AA

8DG60739AA

Transparency SOP — QA & Testing

For 8DG60739AA, a serious receiving inspection should focus on identity, optical hardware condition, and revision control.

1. Part-number inspection
Confirm 8DG60739AA on the manufacturer label. Record the complete model designation, revision, and serial number.

2. Visual inspection
Check the faceplate, optical ports, connectors, ejector mechanisms, PCB condition, labels, and any signs of corrosion or storage damage.

3. Revision verification
Record whether the unit is marked 02, 03, 04, 05, or another revision. Current secondary-market records demonstrate that multiple revisions exist.

4. Platform test
Where the appropriate 1830 PSS test environment is available, verify card recognition, optical operation, alarms, and applicable performance-monitoring functions.

5. Documentation
Keep photographs of the label and serial number with the inspection record. For telecom spares, traceability matters.

One important commercial point: current listings for this exact part include used units, so “available” should never be interpreted as “New Surplus.” The purchasing specification should explicitly state the required condition.

The Veteran’s Tech Trap Guide

⚠️ Trap #1 — Ignoring the hardware revision

The part number is the same, but listings show 8DG60739AA units with revisions 02, 03, 04, and 05. If your installed-system documentation calls for a particular revision, confirm it before purchasing.

PRO TIP: Put all three identifiers on the PO: 8DG60739AA + 112SA1L + required revision.

⚠️ Trap #2 — Confusing A/D OT with a conventional 100G client card

The description is specifically 100G Coherent XL-band A/D OT. It is an optical transport component. Do not substitute a similarly rated 100G client/transponder card merely because both are described as “100G.”

⚠️ Trap #3 — Buying on the shortened description

“1830 PSS 100G card” is not enough information for procurement. The 1830 PSS family contains numerous optical cards with different functions.

Use the complete identifier:

8DG60739AA — 112SA1L — 100G Coherent XL-band A/D OT

Dynamic FAQ

Q1. What is Alcatel-Lucent 8DG60739AA?
It is the 112SA1L 100G Coherent XL-band A/D OT card used with the Alcatel-Lucent 1830 PSS optical transport platform.

Q2. What does 112SA1L mean in relation to 8DG60739AA?
112SA1L is the model/unit designation associated with the 8DG60739AA manufacturer part number in equipment listings and procurement documentation.

Q3. Is 8DG60739AA a 100G card?
Yes. The documented equipment description identifies it specifically as a 100G Coherent XL-band A/D OT.

Q4. Are 8DG60739AA revisions 02, 03, 04, and 05 interchangeable?
Do not assume so. Multiple revisions are documented in current listings, but public sources do not establish universal interchangeability. Verify the approved hardware revision against the installed system before replacement.

Q5. Is New Surplus 8DG60739AA available?
Availability varies. Current secondary-market listings show used units, so a supplier claiming New Surplus should provide clear label photographs, serial information, condition confirmation, and warranty terms rather than relying on a generic “new” description.

Q6. What should I specify when ordering a replacement?
Specify Alcatel-Lucent 8DG60739AA / 112SA1L / 100G Coherent XL-band A/D OT, the required hardware revision if known, 1830 PSS shelf compatibility, stock condition, and warranty/DOA terms.