Description
Core Product Summary
The SAACKE SEAVIS FSC-01 is a combustion controller associated with industrial and marine burner systems. It is identified in supplier listings as part number 982200419 and as an automatic firing sequence controller. In a burner-control installation, the controller coordinates configured operating sequences and interacts with associated control and monitoring equipment.
The FSC-01 is used in burner-management contexts where startup sequencing, operating-state supervision, and coordinated burner operation are important. Its exact functions and safety behavior depend on the installed version, configuration, connected I/O modules, and burner-system design.
For replacement procurement, verify the full part number, hardware or software version, supply requirements, terminal arrangement, and compatibility with the existing SEAVIS system. Do not use unverified online specifications to substitute for the original technical documentation, particularly when the controller participates in combustion safety functions.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | SAACKE |
| Product family | SEAVIS |
| Model | FSC-01 |
| Part number | 982200419, as listed by suppliers |
| Product type | Combustion controller / automatic firing sequence controller |
| Primary system role | Burner control and sequence management |
| Application context | Industrial and marine combustion systems |
| Firmware or version | Confirm the installed unit; listings refer to V3.00 and V3.02 variants |
| Supply voltage | Must be verified for the exact version |
| Power consumption | Must be verified against the applicable documentation |
| I/O configuration | Confirm the installed controller and associated I/O modules |
| Communication interfaces | Confirm the exact version and system configuration |
| Dimensions and weight | Verify against the unit’s nameplate or mechanical documentation |
| Protection rating | Not confirmed for the exact unit |
Specification note: Public supplier listings give conflicting electrical, dimensional, and environmental values for FSC-01 variants. The table therefore separates established product identification from specifications requiring verification.
Engineering Selection Highlights
- Combustion-system control: Identified as the controller for a SAACKE SEAVIS burner-control installation.
- Automatic sequence management: Listed as an automatic firing sequence controller, making the correct configuration important for burner startup and operating sequences.
- Version-sensitive replacement: Listings identify different software or version designations, including V3.00 and V3.02. Confirm the exact installed version before selecting a replacement.
- System-level compatibility: The controller must be matched with the existing I/O arrangement, sensors, actuators, and burner-management architecture.
- Safety-critical application: Where the FSC-01 participates in burner safety functions, replacement and commissioning should follow approved plant procedures and manufacturer documentation.
FSC-01
FSC-01
System Compatibility and Integration Requirements
| Integration area | What to verify |
|---|---|
| SEAVIS system | Confirm the installed system architecture and controller version. |
| Burner equipment | Identify the burner, boiler, furnace, or combustion system controlled by the unit. |
| Digital inputs | Check the connected permissives, interlocks, and status signals against the approved wiring diagram. |
| Digital outputs | Verify the output assignments and the connected field devices. |
| Analog signals | Confirm whether the application uses analog inputs or outputs and the required signal ranges. |
| Flame monitoring | Verify the installed flame detector type and its compatibility with the control system. |
| Fuel and air control | Confirm the configured valves, actuators, and associated feedback devices. |
| Power supply | Match the actual controller rating and terminal requirements. |
| Configuration | Confirm firmware, application parameters, and any required configuration transfer or restoration. |
Do not infer compatibility from the FSC-01 model name alone. A replacement must match the installed hardware and application configuration, particularly where burner permissives, ignition sequences, fuel valves, and flame supervision are involved.
Dimensions, Mounting, and Connection Notes
Reliable dimensions and terminal assignments for the exact FSC-01 version have not been established from the available documentation.
Before installation:
- Record the complete model and part number from the nameplate.
- Confirm the hardware and software version.
- Photograph the terminals, connectors, and existing wiring labels.
- Obtain the correct wiring diagram and installation manual.
- Verify supply voltage, grounding, I/O assignments, and connected field devices.
- Follow the approved shutdown and commissioning procedure for the burner system.
Because combustion control can be safety-critical, do not modify interlocks, bypass protective devices, or transfer parameters from another version without authorization and documented engineering review.
Detailed Product Overview
Combustion control and sequence management
A combustion controller coordinates the operating steps required by its configured burner application. These steps may include startup permissives, pre-ignition checks, ignition sequencing, operating-state monitoring, and shutdown handling. The exact sequence and safety logic of a particular FSC-01 installation must be determined from the approved application documentation.
Integration with sensors and actuators
A burner-control installation can include flame detectors, pressure switches, temperature sensors, fuel valves, air-control actuators, ignition equipment, and alarm circuits. The FSC-01’s actual I/O responsibilities depend on the installed hardware and configuration. Confirm signal types and terminal assignments rather than relying on generic descriptions of the product family.
Version and configuration control
FSC-01 listings reference different version designations, including V3.00 and V3.02. These should not be assumed to be interchangeable. Before replacement, compare the installed unit’s complete designation, software version, I/O architecture, and application configuration. If the replacement requires program or parameter transfer, use the approved procedure for the specific system.
Maintenance and replacement
When a controller is suspected of failure, first review the alarm history, power supply, connected field circuits, and associated I/O equipment. If replacement is required, document the original wiring and configuration before removing the unit. After installation, qualified personnel should perform the prescribed functional checks and confirm that all required protective functions operate correctly before returning the burner to service.
Applications and System Role
The SAACKE SEAVIS FSC-01 is associated with burner-control systems. Its system role is to manage configured combustion-control sequences and coordinate with the equipment and signals defined by the installed application.
Relevant system contexts include:
- Industrial boiler burner systems
- Marine boiler and auxiliary combustion equipment
- Industrial furnaces and thermal-process equipment
- Burner-management and automatic firing-sequence installations
The specific application supported by an individual unit must be confirmed from its original system documentation and configuration.
Frequently Asked Questions
Q1: What is the SAACKE FSC-01?
It is a SEAVIS combustion controller, also described in supplier listings as an automatic firing sequence controller.
Q2: What is the part number for the FSC-01?
The designation 982200419 is associated with the FSC-01 in supplier listings. Confirm the number on the actual nameplate before ordering.
Q3: Is the FSC-01 used in boiler systems?
Yes. An equipment spare-parts document lists the SEAVIS FSC-01 as the controller for an automatic burner-control system associated with a boiler burner installation.
Q4: Are FSC-01 V3.00 and V3.02 interchangeable?
Interchangeability has not been confirmed. Compare the complete hardware designation, software version, I/O configuration, and system documentation before substituting one version for another.
Q5: What is the operating voltage of the FSC-01?
A single verified voltage specification for all FSC-01 versions has not been established. Check the unit label and the manual matching the installed version.
Q6: Which flame detectors and I/O modules are compatible?
Compatibility depends on the installed SEAVIS configuration. Verify the supported detector type, I/O modules, signal requirements, and wiring against the applicable documentation.
Q7: What should be provided when requesting a replacement quotation?
Provide the complete model and part number, version information, nameplate photograph, quantity, required condition, and the burner-system or controller details. This information helps confirm the correct configuration.
Q8: Can the FSC-01 be replaced without recommissioning the burner system?
Do not assume so. Follow the manufacturer’s replacement instructions and the plant’s approved procedures for verifying control sequences and protective functions before returning the system to service.
Start Chat
