Description
Core Product Summary
The SAM Electronics / Lyngsø Marine IFM 2200 is a marine automation interface module identified by part number 810.001.240-05. It is associated with the Lyngsø Marine control-system product range and is intended for use within compatible marine electronic and automation equipment.
The module is also associated with the board marking “Switching Of SW Supply.” This marking is useful when comparing the installed component with a replacement candidate, particularly when several IFM 2200 variants or board revisions are present in maintenance records. Before selecting the module, compare the complete part number, PCB identification, connector arrangement, and installed equipment documentation. The model designation alone does not establish its supply ratings, pin assignments, or compatibility with a specific vessel control system.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer / brand | SAM Electronics / Lyngsø Marine |
| Model | IFM 2200 |
| Part number | 810.001.240-05 |
| Product type | Marine automation interface module |
| Board marking | Switching Of SW Supply |
| Application category | Marine control and automation equipment |
Engineering Selection Highlights
- Exact part number 810.001.240-05 → Match the complete identifier against the installed module before selecting a replacement.
- IFM 2200 designation → Use the model marking alongside the full part number to distinguish the component in maintenance documentation.
- “Switching Of SW Supply” marking → Compare this PCB marking with the installed board to help identify the correct hardware variant.
- Marine automation application → Confirm that the intended equipment uses the corresponding Lyngsø Marine control-system component.
- Board-level identification → Compare connector positions, PCB labels, and hardware markings rather than relying on appearance alone.
Detailed Product Overview
Product identification
SAM Electronics / Lyngsø Marine IFM 2200, part number 810.001.240-05, is identified as a marine automation interface module. The complete part number should be retained in equipment inventories, maintenance records, and procurement specifications to avoid confusion with similarly named modules.
The marking “Switching Of SW Supply” is associated with this product in available product descriptions. It may help distinguish the board during physical inspection, but it should not be interpreted as a complete circuit specification.
Role in marine automation
Marine automation equipment can contain dedicated modules for control, monitoring, power distribution, and interfacing. The IFM 2200 is associated with this broader control-system environment. Its exact relationship to a controller, power subsystem, or other module must be established from the relevant equipment documentation rather than inferred from the IFM designation.
This distinction is important when diagnosing faults. A component described as an interface module may have a specialized function within its host system, and incorrect assumptions about its electrical role can lead to an unsuitable replacement.
Selection and maintenance considerations
When identifying an IFM 2200 for service, compare the complete part number and board markings against the installed component. Also record the connector layout, board revision information, and host equipment identification where available.
Do not assume that another IFM 2200 board or a visually similar module has matching electrical characteristics. Before installation, establish the required supply conditions, terminal or connector assignments, and any configuration dependencies from the equipment documentation.
IFM 2200
System Compatibility & Integration Requirements
| Item / Dependency | Selection Requirement | Practical Note |
|---|---|---|
| Control-system family | Compatible SAM Electronics / Lyngsø Marine equipment | Confirm the specific equipment model and module position using system documentation. |
| Hardware identity | IFM 2200, part number 810.001.240-05 | Check the complete part number and board markings. |
| Electrical interface | Must match the installed system’s documented requirements | Confirm supply ratings, connector assignments, and wiring before installation. |
| Module integration | Equipment-specific installation | Use the applicable system schematic and maintenance procedure to establish the correct installation position. |
Applications & System Role
The IFM 2200 belongs to the marine automation equipment category and is associated with SAM Electronics / Lyngsø Marine control systems. Its precise role in a particular vessel installation should be established from the system documentation and the board’s identifying markings.
For maintenance teams, the key task is to identify the module correctly before investigating its electrical function or replacement requirements. A board-level designation such as “Switching Of SW Supply” provides an additional identification clue, but it does not independently establish the complete circuit function or external interface.
When planning maintenance, document the installed part number, PCB revision or markings, connector arrangement, and host equipment model. These details provide a more dependable basis for component selection than a generic description of a marine interface module.
FAQ
What is the SAM Electronics IFM 2200?
The IFM 2200 is a marine automation interface module associated with SAM Electronics / Lyngsø Marine equipment.
What is the part number of the IFM 2200?
The part number associated with this model is 810.001.240-05.
What does the “Switching Of SW Supply” marking mean?
It is a board-identification marking associated with the module. The marking alone does not establish the complete electrical function or circuit specifications.
Where is the IFM 2200 used?
It is associated with marine automation and control equipment. The exact host system and installation position depend on the vessel’s equipment configuration.
What should be checked before selecting a replacement?
Compare the complete part number, PCB markings, connector layout, and host equipment documentation. Confirm the electrical requirements and installation details before fitting the module.
Are the electrical ratings and connector assignments established by the model number?
No. The model designation alone is insufficient to determine the complete electrical ratings, pin assignments, or compatibility requirements. Use the applicable technical documentation for the installed system.
Start Chat
