Description
Product Introduction
The Contec BUS-PCI NO.7102A is an industrial-grade PCI bus expansion interface card designed for legacy IPC (Industrial PC) rack systems. It bridges internal computer processing architectures with external sensor networks, data acquisition modules, or specialized automation peripheral racks, ensuring stable, noise-resistant data transfer across factory environments.
In aging automated test benches and legacy industrial control workstations, the NO.7102A maintains system architecture compatibility without requiring a complete PC and motherboard migration. Securing a verified, functional Contec interface card prevents costly system re-engineering when older expansion hardware fails.
Key Technical Specifications
| Parameter | Specification |
| Manufacturer | Contec Co., Ltd. |
| Part Number / Model | BUS-PCI NO.7102A |
| Product Category | Industrial PCI Bus Expansion / Interface Card |
| Bus Architecture | Standard PCI (Peripheral Component Interconnect) |
| Operating Voltage | +5V / +3.3V PCI bus standard power rails |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity Range | 10% to 90% RH (Non-condensing) |
| Enclosure Requirements | Industrial IPC Chassis (IP20 Enclosure Protected) |
| Lifecycle Status | Obsolete / Discontinued by Manufacturer |
Application Scenarios & The “Trench” Experience
Picture this: It is mid-afternoon during a critical batch quality assurance test run, and the main testing workstation abruptly blue-screens. Upon rebooting, the system BIOS reports a PCI parity error, and the data acquisition software can no longer communicate with the test rig’s interface chassis. Diagnostics reveal that the legacy Contec PCI interface board has suffered an internal component failure. You cannot simply install a modern PCIe card into an older PCI slot motherboard without a complete system redesign. Slipping in a verified surplus Contec BUS-PCI NO.7102A gets the testing workstation communicating with the hardware rack immediately, saving days of downtime.
- Automated Factory Test Benches – Data acquisition and sensor logging – Maintains stable communication between legacy PC mainboards and test fixtures.
- Semiconductor Inspection Equipment – Legacy optical and electrical testing cells – Preserves precise bus synchronization across older PC operating systems.
- Process Control Workstations – SCADA and monitoring operator nodes – Interfaces industrial control racks directly to standard PCI slots.
- Specialized Packaging Machinery – Computer-integrated line controllers – Extends the operating lifespan of mature industrial computer enclosures.
Transparency SOP: Quality Assurance & Testing
Industrial computer boards cannot be trusted “as-found.” Every Contec interface card goes through our bench protocol:
- Visual & Trace Inspection: Examining gold-plated PCI edge fingers for wear, checking surface-mount capacitors for bulging, and verifying clean PCB traces.
- Cold Resistance Check: Measuring bus-to-ground isolation resistances to ensure zero short circuits across power planes.
- Live IPC Seating Test: Installed into a dedicated industrial test motherboard running a compatible operating environment.
- Bus Communication Handshake: Executing diagnostic register read/write loops to verify error-free data transfer across the PCI slot.
- Anti-Static & Protective Packaging: Sealed in a heavy-duty moisture-barrier ESD bag and cushioned in high-density structural foam.
BUS-PCI NO.7102A
The Veteran’s Tech Trap Guide
- ⚠️ Bus Voltage Mismatch Warning: Be careful when inserting legacy PCI cards into motherboards that support mixed-voltage signaling. Ensure your motherboard slot voltage matches the card’s requirements to prevent burning out the bus traces.
- ❗ Gold Finger Oxidation: Never touch the gold-plated edge connector fingers with bare fingers; skin oils attract dust and cause intermittent contact faults. Clean the fingers with an isopropyl alcohol wipe if the board has been in storage.
- ⚠️ Power-Down Rule: Always completely shut down and unplug the industrial PC before installing or removing the BUS-PCI NO.7102A. Hot-plugging legacy PCI cards will fry the motherboard chipset.
- ❗ Driver & OS Compatibility: Verify that your current operating system environment retains driver support for this legacy Contec bus architecture if you are updating system components around it.
Frequently Asked Questions (FAQ for Conversion)
Q: Is the Contec BUS-PCI NO.7102A compatible with modern PCIe (PCI Express) slots?
A: No. This card is built for standard legacy PCI bus slots. It will not physically or electronically fit into PCIe x1, x4, x8, or x16 slots without a dedicated hardware bridge adapter.
Q: Are these interface cards brand new or refurbished?
A: Because Contec has discontinued this specific hardware line, available inventory consists of certified New Surplus or thoroughly tested Refurbished units. Every card is bench-tested before shipping.
Q: Do I need specialized drivers to operate the NO.7102A?
A: Yes, depending on your application software and operating system, you will need the appropriate Contec API or driver package to interface with the card registers.
Q: What kind of warranty is included with this purchase?
A: All supplied BUS-PCI NO.7102A modules are backed by a comprehensive 12-month operational replacement warranty.
Start Chat
